Product finder

Use the filters below to browse our products. Please note that not all product offerings are available in all regions and countries, and you can use the filter below to find products available in other markets.

Active filters:
South East Asia & Pacific
Australia
Hardtop XP II product logo
Topcoats

Hardtop XP II

Hardtop XP II is an exceptionally versatile and efficient topcoat that provides a solution for countless scenarios, where durability and performance are key priorities.

  • Lasting aesthetics
  • Exceptional versatility
  • Improved hardness development
Jotun SeaQuest Endura II logo blue
Fouling protection

SeaQuest Endura II

Operational flexibility for unpredictable trades.

  • Optimised for unpredictable trades
  • Tin free system – REACH compliant
  • 1.2% expected speed loss
Jotun SeaQuantum XT logo blue
Fouling protection

SeaQuantum XT

Robust performance for high fouling intensity trades.

  • Optimised for high fouling intensity trades
  • 1.0% expected speed loss
  • Up to 14.7% fuel savings
SteelMaster 90SB logo
Fire protection coatings

SteelMaster 90SB

A one component solventborne acrylic thin film intumescent that provides fire protection for structural steel.

  • Fire protection from 30 minutes to 120 minutes
  • Majority of steel sections covered
  • Easy airless spray application
Jotamastic 85 logo
Anticorrosive primers

Jotamastic 85

A multi-purpose, robust and efficient, surface tolerant primer that can be used on multiple application areas in different temperatures with short overcoating intervals.

  • Proving surface tolerance
  • Easy and efficient to use
  • Increased durability
Jotachar JF750 XT logo
Fire protection coatings

Jotachar JF750 XT

A patent-pending intumescent hydrocarbon fire protection developed for the most extreme environments.

  • Proven all-climate performance
  • Tested at the world's only Arctic test station for coatings
  • Patent pending flexible binder technology
Powder box
Building - exterior

Primax Defend

Primax Defend is zinc-free powder primer with standard corrosion resistance.

  • Very good corrosion protection
  • Very good mechanical properties
  • Protection for up to C4 Very High corrosivity category
SeaQuest logo
Fouling protection

SeaQuest

Biocide free coating which protects hull from fouling contributing to hydrodynamic efficiency to be used as a finish coat for immersed environments.

  • High gloss and long term aesthetic appearance
  • Suitable for vessels trading at medium to high speed & activity
  • Biocide free foul release coating
SeaQuest Endura logo
Fouling protection

SeaQuest Endura

Optimised for vessels requiring flexibility in operational parameters, and frequent changes in trade.

  • Expected 1.3% speed loss
  • Offering flexibility for vessels with unpredictable trade
  • High initial idle period up to 120 days
Anticorrosive primers

Alkydprimer

Alkydprimer is an easy to use, one-component oxidatively drying alkyd coating.

  • Low application cost
  • Resistant to dry heat up to 120 C
  • Easy to use
Jotacote UHB logo
Anticorrosive primers

Jotacote UHB

An ultra high build and high solid polyamine cured epoxy, with good abrasion and corrosion resistance properties.

  • Good abrasion resistance
  • Good corrosion protection under corrosive environments up to very high and immersed condition
  • Ultra high build and high solid
Powder box image
Powder coatings

Jotapipe IL

Jotapipe IL offers excellent chemical resistance to protect your pipelines and their contents.

  • Approved and safe for drinking water
  • Linings for aggressive service, including sour gas
  • Excellent chemical resistance
Tankguard 412
Tank linings

Tankguard 412

This solvent-free tank lining is suitable for potable water, grey water and crude-oil tanks.

  • Tank lining with good chemical resistance
  • Approved for potable water
Jotatemp 1000 HT logo
Heat resistant coatings

Jotatemp 1000 HT

A heat resistant coating for temperatures from -196 to 1000 °C, where substrates allow.

  • Resistant to temperatures from -196 °C to 1000 °C
  • Optimized performance on stainless steel, alloyed steel (P91) and ceramic substrates
  • Can be applied on hot substrates up to 250 °C
Powder coatings

Primax Miles

Primer for all forms of alloy wheels that allow you to coat more wheels with less powder.

  • Up to 20% less powder consumption
  • Homogenous appearance
  • Superior flow
Powder coatings

Jotapipe LT

A range of Low Application Temperature (LAT) Fusion-Bonded Epoxy (FBE) powder coatings for pipelines.

  • Low application temperature
  • Works with high grade steel
  • Reduced polyolefin usage
SteelMaster 600WF logo
Fire protection coatings

SteelMaster 600WF

The most efficient 60 minute waterborne intumescent coating used for the protection of structural steel against cellulosic fires.

  • Engineered for a better environment 
  • The most competitive waterborne fire protection product
  • Waterborne
SteelMaster 1200WF logo
Fire protection coatings

SteelMaster 1200WF

The most efficient 120 minute waterborne intumescent coating used for the protection of structural steel against cellulosic fires.

  • Low thickness required 
  • HAPs free 
  • Low VOC, low environmental impact 

Showing 18 of 127 items

Loading...